Fosshape Black 400 - Small Cuts

    Code: COS-FS400SC

    $29.00

    The weight and thickness of Fosshape Black 400 is between the standard 300 and 600 FOSSHAPE grades. Sold in solid jet black only.

    Often called the "buckram replacement", this unique felt-like fabric (45" wide or 114.3cm) is heat activated to achieve rigidity, stiffness and surface enhancement without the use of water, messy or hazardous additives. Synthetic FOSSHAPE can easily be cut with scissors, will not fray like conventional woven fabrics and can be sewn to itself or other fabrics as a hidden stiffener or shaped into stand alone structures. Mildew resistant and dye-able as well. Fabric steamers are the often preferred method for forming a desired amount of rigidity and stiffness, but conventional steam irons or an industrial hot air gun may oftentimes be helpful. The level of stiffness and surface smoothness is achieved by adjusting heat, time and pressure. The midweight FOSSHAPE Black 400 is heavier in weight and thicker than FOSSHAPE 300.

    • Standard weight of 12 oz per yard2 or 400 grs per sq/mtr at .135" thickness
    • Fractional cuts for smaller projects that don't require full yardage
    • Also available by Full Yards

    Learn more about Thermoplastics on our blog here:

    Fosshape & Wonderflex