Steampunk Clasp Busk Set - 13"
The steel busks are heavy weight and perfectly drilled to fit the clasps. They are coated after drilling so the holes are protected. You will need an Awl or Revolving Punch to insert the rivets, and a setting tool and anvil to set the rivets.
• 2 busk sides in 13" length x 1" width x 0.90mm thick
• Each busk side is pre-drilled to accommodate clasps
• 5 swing arm clasps in Antique Brass
• 20 sets of rivets in Antique Brass
If you haven't set Rivets before you may want to get additional Rapid Rivets in Medium to test setting rivets.
The Rivets that come with the kit are the same length as Medium Rapid Rivets, the heads are slightly smaller.
If you are using thick leather with this kit you will want to get Rapid Rivets in Large.